null
Pelsue

Pelsue Heavy Duty Blower Hoses: 8" Diameter

Ask Questions
Pelsue Heavy Duty Blower Hoses: 8" Diameter

Pelsue Heavy Duty Blower Hoses: 8" Diameter

$197.10
$262.80
RRP: $262.80
(You save $65.70 (25%))
  • Availability: Ships in 3-5 days (Call for availability)
Availability: Ships in 3-5 days (Call for availability)
In Stock & Ready To Ship!
Current Stock:Only left:
Description

There are three styles of the high quality 8” diameter ventilation hoses. Hoses have a tension buckle & strap at one end. They are made of polyester with neoprene coating high retraction (HRT).

Hazardous Location Basics
Hazardous Location
An area where the possibility of explosion and fire is created by the presence of flammable gases, vapors, dusts, fibers, or flyings.
Class I (NEC-500-5)
Those areas in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
Class II (NEC-500-6)
Those areas made hazardous by the presence of combustible dust.
Class III (NEC-500-7)
Those areas in which there are easily ignitable fibers or flyings present, due to type of material being handled, stored, or processed.
Division 1 (NEC-800-5, 6, 7)
Division One in the normal situation, the hazard would be expected to be present in everyday production operations or during frequent repair and maintenance activity.
Division 2 (NEC-500-5, 6, 7)
Division One in the abnormal situation, material is expected to be confined within closed containers or closed systems and will be present only through accidental rupture, breakage or unusual faulty operation.
Groups (NEC-500-3)
The gases and vapors of Class I locations are broken into four groups by the code A, B, C, and D. These materials are grouped according to the ignition temperature of the substance, its explosion pressure, and other flammable characteristics. Class II-Dust locations-groups E, F, and G. These groups are classified according to the ignition temperature and the conductivity of the hazardous substance.
Seals (NEC-501-5 & 502-5)
Special fittings that are required either to prevent the passage of hot gases in the case of an explosion in a Class I area or the passage of combustible dust, fibers, or flyings in a Class II or III area.
Articles 500 - 503 (1987 NEC)
Explains in detail the requirements for the installation of wiring or electrical equipment in hazardous locations. These articles along with other applicable regulations; local governing inspection authorities, insurance representatives, and qualified engineering/technical assistance should be your guides to the installation of wiring or electrical equipment in any hazardous or potentially hazardous location.
Typical Class I Locations:
· Petroleum refineries, and gasoline storage and dispensing area.
· Industrial firms that use flammable liquids in dip tanks for parts cleaning or other operations.
· Petrochemical companies that manufacture from gas and oil.
· Dry-cleaning plants where vapors from cleaning fluids can be present.
· Companies that have spraying areas where they coat products with paint or plastics.
· Aircraft hangers and fuel servicing areas.
· Utility gas plants, and operations involving storage and handling of liquefied petroleum gas or natural gas.
Typical Class II Locations:
· Grain Elevators, flour and feed mills.
· Plants that manufacture, use or store magnesium or aluminum powders.
· Plants that have chemical or metallurgical processes…producers of plastics, medicines, and fireworks, etc.
· Producers of starch or candies.
· Spice-grinding plants, sugar plants, and cocoa plants.
· Coal preparation plants and other carbon-handling or processing areas.
Typical Class III Locations:
· Textile mills, cotton gins, cottonseed mills, and flax processing plants.
· Any plant that shapes, pulverizes, or cuts wood and creates sawdust or flyings.
Note: Fibers and flyings are not likely to be suspended in the air, but can collect around machinery or on lighting fixtures and where heat, sparks, or hot metal can ignite them.
haz-loc-chart.jpg

About Pelsue

Pelsue is the premier manufacturer of ventilation equipment. Based in Englewood, CO, Pelsue has been building and designing ventilation equipment since 1963.

Related Products

Pelsue Conductive Blower Hoses: 8" Diameter

Pelsue Conductive Blower Hoses: 8" Diameter

Pelsue
$326.31 - $498.22
There are three styles of the high quality 8” diameter ventilation hoses. Hoses have a tension buckle & strap at one end. They are made of polyester with neoprene coating high retraction (HRT)...
Choose Options
Choose Options
Pelsue Standard Blower Hoses: 8" Diameter Pelsue Standard Blower Hoses: 8" Diameter

Pelsue Standard Blower Hoses: 8" Diameter

Pelsue
$186.15 - $317.55
There are three styles of the high quality 8” diameter ventilation hoses. Hoses have a tension buckle & strap at one end. They are made of polyester with neoprene coating high retraction (HRT)...
Choose Options
Choose Options
Pelsue Axial Blowers Pelsue Axial Blowers

Pelsue Axial Blowers

Pelsue
Pelsue Axial Blowers
$777.45 - $1,276.77
1325P FeaturesPower: Electric - 1/3 HP, 120VAC, 3 ampsCertifications: CSA, CEESIDimensions: 18"L x 14"W x 15"HWeight: 17 lbs.Free Air (certified): 1,004 cfmWit
Choose Options
Choose Options
Allegro 8" Heavy Duty Explosion-Proof Blower System with 8" MVP (9503 Blower) | 9520-03M

Allegro 8" Heavy Duty Explosion-Proof Blower System with 8" MVP (9503 Blower) | 9520-03M

Allegro
9520-03M
$2,478.93
Our Complete Ventilation Systems include all the most requested equipment you need for your confined space site. The systems include your choice of our most popular Centrifugal Blowers, 6′ & 15′...
Add to Cart
Add to Cart
Allegro Centrifugal Heavy Duty Blower | 9502

Allegro Centrifugal Heavy Duty Blower | 9502

Allegro
9502
$1,643.87
High performance and durability are built into this blower. It’s large totally enclosed 1½ hp motor and dual 8” (20.3 cm) ports, allow high flow allowing positive ventilation or fume extraction...
Add to Cart
Add to Cart

Recently Viewed Products

loading

loading

loading

loading