For the longest offset reach in a wall-mounted configuration, the DK4248 mast (42"/48" reach, 48 lbs, structural aluminum, CP60 center post and EM01 elbow included) pairs with the DSS-W1 Wall Mounted Plate/Sleeve, stainless steel and anchored by bolts or welds to truck bumpers, tank walls, catwalk sides, meter pits, clarifiers, and similar vertical surfaces. Setup takes roughly 5 minutes, and the system is man-rated to 310 lbs.

Choosing a permanent mount over a portable base gets you:

• Always on site
• Provides greater offset reach
• Allows 360° pivot

Note: A hoist, Standard SRL, or 3-Way SRL, along with its corresponding bracket (MB-PF1 for hoists, MB-FSB for Standard SRLs), is required to complete this system and is sold separately from this mast-and-sleeve bundle. The Davit System's universal bracket mounts one device, with an additional mounting location available for a second hoist or SRL if your application needs both.