The FT-C70 Uni-Lite Fall Arrest Post is engineered from carbon fiber to flex and absorb fall force, functioning much like a fishing pole under load. Its 360° swivel upper insert gives up to three workers independent 5.8' anchor points. The post itself is 9"D x 6'H and weighs 39 lbs.

Here, we pair the post with the BC-08A Adjustable Angle Clamp, constructed from carbon steel with steel hardware and designed as a portable mounting base for a fall arrest tower on structural angle sections. It can be installed in two configurations depending on the orientation of the angle beam, fitting angles ranging from 3.5" to 8" with a flange thickness of 3/16" to 3/4". All specifications are based on and valid only for use with the FT-C70; Pelsue cannot verify safety or compliance when used with any other system.

BC-08A General Specifications:

• Designed and tested for use as a portable Fall Arrest Tower mounting base
• Man-rated load capacity using the fall arrest tower is determined by the tower itself
• Warning: a 900 lb. maximum arrest force (MAF) device must be used as part of a complete fall arrest system; maximum weight of the person on the anchorage is 350 lbs. (159 kg) inclusive of all tools and equipment

BC-08A Materials & Construction:

• General construction: Welded carbon steel, zinc plated
• Hardware: Grade 8 steel, zinc-plated

BC-08A Weight: 35 lbs. (15.9 kg)

BC-08A Features:

• For portable use on angular structural sections
• Can be installed in two configurations (normal and inverted) depending on beam orientation
• Provides a mounting base for the FT-C70
• Two adjustment bolts accommodate various flange thicknesses

An optional Carrying Case is available at checkout.