Pelsue's Uni-Lite Fall Arrest Post (FT-C70) trades heavy steel and aluminum for carbon fiber, making it light enough to reposition on the job site without heavy equipment. It flexes to absorb fall force much like a fishing rod, and its upper insert provides a 360° swivel tie-off with three 5.8' anchor points, supporting up to three workers. Post dimensions: 9"D x 6'H, 39 lbs.

Paired here with the FB-SW3 Weld-On Base Plate with Tie-Off Anchor — a 2-ear pin mount design intended to be permanently welded to structural steel and used with any of Pelsue's removable-mounting fall arrest towers.

FB-SW3 General Specifications:

• Intended to be permanently attached to structural steel members and used with any of Pelsue's removable-mounting fall arrest towers
• Plate is to be welded to the surface, adhering to all Pelsue guidelines

FB-SW3 Materials & Construction:

• General construction: Welded carbon steel
• Weld certification: AWS - D1.1
• Material: ASTM A36 steel

FB-SW3 Dimensions: Length 9.0" × Width 8.0" × Height 2.9" Weight: 12 lbs. (5.5 kg)

FB-SW3 Strength & Testing Data:

• Torsional proof load: 20,274 ft.-lb. (27,488 N-m) at pin hole center
• Equivalent load and angle: 5,400 lb. (2,449 kg) tensile force applied at a point 55 inches (1.4 m) above pinhole center at 55° off vertical
• Rating: 3-person fall arrest anchorage when used with an approved arrest tower and 900 lb. MAF devices on all connections

An optional Carrying Case is available at checkout.