For mounting to a wall, tank, or truck bumper rather than a floor, this configuration pairs the DK1824 mast (18"/24" offset reach, 42 lbs, structural aluminum) with the DSS-W1 Wall Mounted Plate/Sleeve, stainless steel, anchored by bolts or welded to truck bumpers, tank walls, catwalk sides, meter pits, clarifiers, and similar vertical surfaces. Includes the CP60 center post and EM01 elbow, sets up in about 5 minutes, and is man-rated to 310 lbs.

Choosing a permanent mount over a portable base gets you:

• Always on site
• Provides greater offset reach
• Allows 360° pivot

Note: A hoist, Standard SRL, or 3-Way SRL, along with its corresponding bracket (MB-PF1 for hoists, MB-FSB for Standard SRLs), is required to complete this system and is sold separately from this mast-and-sleeve bundle. The Davit System's universal bracket mounts one device, with an additional mounting location available for a second hoist or SRL if your application needs both.