This configuration pairs the DK3036 mast (30"/36" offset reach, 45 lbs, structural aluminum, includes CP60 center post and EM01 elbow) with the DSS-F3 Flush Floor Mount Sleeve, built for existing concrete, drilled and bolted in, or welded or bolted into steel, then finished flush with the floor for high-traffic, trip-hazard-sensitive areas. Setup takes roughly 5 minutes, and the system carries a 310 lb man rating.

Permanent mount sleeves like this one provide:

• Always on site
• Provides greater offset reach
• Allows 360° pivot

Note: Note that this combo has the mast and sleeve only, you'll still need to add a hoist, Standard SRL, or 3-Way SRL (sold separately) plus its bracket (MB-PF1 for hoists, MB-FSB for Standard SRLs) to complete the system. The Davit System's universal bracket mounts one device, with an additional mounting location available for a second hoist or SRL if your application needs both.