Pouring fresh concrete for this installation? The DSS-C1 Flush Floor Mount Sleeve (stainless steel) sits flush with the finished floor, ideal for high-traffic areas where trip hazards matter. Paired here with the DK4248 mast: 42"/48" offset reach, 48 lbs, structural aluminum, CP60 center post and EM01 elbow included. The system sets up in about 5 minutes and is man-rated to 310 lbs.

This sleeve type, like all Pelsue permanent mount sleeves, offers:

• Always on site
• Provides greater offset reach
• Allows 360° pivot

Note: This combo includes the mast and mounting sleeve only. A hoist, Standard SRL, or 3-Way SRL (sold separately) completes the working system, along with its matching bracket (MB-PF1 for hoists, MB-FSB for Standard SRLs). The Davit System's universal bracket mounts one device, with an additional mounting location available for a second hoist or SRL if your application needs both.